ASBESTOS WET INJECTION SYSTEM
BS8520-1:2009 COMPLIANT

The injection machine with its unique needle system is capable of delivering a consistent flow that can be set to operate on a timed cycle. The Enviro-Vac system provides controlled injection of asbestos containing material. No adjustment required.

ASBESTOS WET INJECTION SYSTEM

Controlled injection of asbestos containing material using the Enviro-Vac delivery system.

TECHNICAL INFORMATION

  • No adjustments required.
  • Robust, durable, all plastic construction.
  • Powerful efficient pump ensures maximum flow.
  • Factory set pressure valve requires no adjustment ensuring minimum operator error.
  • Wetting agent concentration can be altered to suit the material being removed.
  • Three filters ensure the needles do not become blocked due to poor quality water supply.
  • Translucent 100 litre tank with graduations.
  • Self mixing chemical feature.
  • Certificate of compliance showing needle test results.
  • Does not rely on manual adjustment of flow rate from each needle.
  • Needles can be added up to a maximum of 100 without affecting the flow rate giving greater flexibility.
  • Replacement needles and needle assemblies are available to order from stock on our accessories page.
  • Alarm feature to show loss of liquid flow.
  • Spray application & single point injection.

PRESSURE CONTROL BOX

This must be used with the main injection unit to maintain a flow of 35ml per minute through each needle.

Being lightweight and fitted with quick release hose couplings enables the unit to be used with ease at different heights.

Inside each needle module is a
unique pressure control valve
which can deliver a consistent
balanced output to each needle
ensuring the requirements
of BS8520-1:2009 are met.

DWELL TIME FEATURE

The Wet Injection Unit can be set to operate on a timed cycle - 5 minutes injection followed by 5 minutes dwell time to allow the fluid to be absorbed into the ACM. This function can be over-ridden for constant injection or spray application.

TECHNICAL SPECIFICATION



Model Number Voltage Filter Stages Motors Amps Decibels Dimensions H/W/L (mm) Filter Grades Kg
Wet Injection Unit 110/240 03 01 01 71 900 x 590 x 900 70 Micron 38